Home | Shop | About Us | Links | Contact Us

Product Range Selected:

 
Recently Sold Items»

SOLD - Apexi SAFC II NEO

YOU MAY ALSO LIKE...

PRICE:

 £POA (Includes VAT)

UK POSTAGE:

 £0.00 (Postage to UK Mainland)

EURO POSTAGE:

 £28.00 (Postage to Europe)

ABOUT THIS PRODUCT:


AFC Air Flow Converter

How does the AFC Air Flow Converter Work?

The A'PEXi Air Flow Converters work by intercepting the signal between the car's air flow meter and the ECU. The Air Flow Meter is the device that tells the ECU how much air is entering the engine so that the ECU can add the correct amount of fuel.

The ECU calculates the proper ratio of fuel to air for a stock, unmodified engine. Certain engine modifications can cause the dynamics of the engine to require more fuel. In this case, there are two common options for modifying the amout of fuel being input into the engine. One can either install larger injectors or increase the fuel pressure to the stock injectors is increased.

Since the stock ECU thinks that it knows how much fuel it is putting into the engine based on the stock injector size and the stock fuel pressure, changing either of these will result in increased fuel. You may get lucky and just pick the perfect injector or fuel pressure that gives you the perfect air/fuel ratio. You may also get lucky and pick this weekends winning lottery numbers. In either case I wouldn't bet the farm on it. The Air Flow Converter gives you the means to adjust the amount of fuel that the ECU injects into the engine by modifying the signal from the air flow meter. This is done a specific RPM levels. This way you can tell the engine that a certain amount more air is flowing into the engine as a specific RPM than is really entering the engine, and the ECU will add that much more fuel. Decrease it at another RPM level and the ECU will decrease the fuel into the engine.

What cars can use the AFC Air Flow Converter?

In general, any Japanese-made car with factory fuel injection and a mass air flow meter. However, these have been adapted to work with many other cars made in Korea, the USA, and Europe. It all boils down to identifying the correct wire into the ECU. In general, the following wires must be identified:

  • Ground
  • Power
  • RPM
  • Air Flow / Pressure Signal Input
  • Air Flow / Pressure Signal Output

Condition : Used

Quantity:

  


SOLD - Drivers Side CaliperSOLD - Drivers Side Caliper
£POA

View Product »

SOLD - Skyline Front PanelSOLD - Skyline Front Panel
£POA

View Product »

SOLD - GTR Rear SpoilerSOLD - GTR Rear Spoiler
£POA

View Product »

SOLD - 1.3 Bar Rad CapSOLD - 1.3 Bar Rad Cap
£POA

View Product »

SOLD - EBC Bluestuff R33 GTS-t FrontSOLD - EBC Bluestuff R33 GTS-t Front
£POA

View Product »

© Mofomos Company Reg No:5271309, Reg Address: 144 Finchampstead Road, Wokingham, Berks, RG41 2NU. VAT No: 904 5205 55
Delivery | Terms and Conditions | Privacy Statement | Contact Us